🚨
Thrifty Hall Effect
  • 🤖Thrifty Hall Effect
  • Setup Guide
    • 🛠️Getting set up
      • 🧲Magnet Placement
      • 🎇Wiring
      • 💻Software
      • 🏋️Using with 3.3V
  • 💣Absolute Max Ratings
Powered by GitBook
On this page
  1. Setup Guide
  2. Getting set up

Wiring

PreviousMagnet PlacementNextSoftware

Last updated 1 year ago

Be careful to match the GND on the cable to the GND on the case and the PCB and the RIO.

Wiring to RoboRio

The primary way to interface with this sensor is plugging the Dupont style connector from the sensor into the RoboRIO.

The signal pin is a digital on/off, with it moving from high to low when the magnet is near.

🛠️
🎇